Fire Alarm System Notification Appliances

[IDG-02-004]

Notification Appliances attached to fire alarm and signaling systems provide indication to occupants using visual, audible, tactile and textual methods. Notification appliances are designed to be perceived by any person and the appliances stimulate either the sense of sight, touch or hearing. Fire alarm and signaling system designers will select the appropriate appliance for the application. Sleeping areas will have low-frequency sounders, occupancies where large number or people gather will have voice instructions, or those with extreme hearing loss may have devices to shake their bed to awaken them. Fire alarm system notification appliances are required and it is essential to the protection of life.

Code: NFPA 72 (2025) | Duration: 3 Contact-Hours | Cost: $30.00 | Access: 30-Days

Download Syllabus

No Textbooks Needed!

Our courses are designed to engage the participant to interact with published codes and standards. We don't try to sell you books. The "Text Books" required for all of our courses are codes and standards that can be accessed online for FREE!

Fire Alarm System Notification Appliances

The topics covered in this course are listed below:

  • Define common terms associated with notification appliances.
  • Explain the purpose and general requirements associated with notification appliances.
  • Describe the classes of DC-powered and AC-powered notification appliance circuits and the effects of voltage drop and electrical dB loss.
  • Determine the difference in Public Mode and Private Mode applications utilizing notification appliances.
  • Recognize the requirements of audible and visual notification appliance characteristics.
  • Compare the operation of textual, tactile and graphical notification appliances.

Course Curriculum


  Instructions
Available in days
days after you enroll
  Course References
Available in days
days after you enroll
  Introduction
Available in days
days after you enroll
  Learning Objectives
Available in days
days after you enroll
  Definitions
Available in days
days after you enroll
  Module 1: Purpose and Application
Available in days
days after you enroll
  Module 2: Notification Appliance Circuits
Available in days
days after you enroll
  Module 3: Notification Appliance Audible Requirements
Available in days
days after you enroll
  Module 4: Notification Appliance Visual Characteristics
Available in days
days after you enroll
  Module 5: Textual, Tactile and Graphical Appliances
Available in days
days after you enroll
  Knowledge Assessment
Available in days
days after you enroll

Instructional Design Group, LLC's IDG University

Fire Alarm and Fire Protection Customized Training and Program Development for Companies, Organizations and Individuals

Featured Courses


Fire Alarm System Initiating Devices

Fire alarm and signaling systems rely on initiating devices to transmit a change-of-state, which signal is processed by programming to activate outputs. Initiating devices attached to a fire alarm system are either automatic, or manually activated. Initiating devices detect particles of combustion, heat, gases, temperature, position of valves and monitors equipment. The performance of initiating devices requires the proper selection, location according to NFPA 72, the Fire Alarm and Signaling Code. Code: NFPA 72 (2025) | Duration: 3 Contact-Hours | Cost: $30.00 | Access: 30-Days

Instructional Design Group (IDG), LLC

Instructional Design Group (IDG), LLC

$30

Protected Premises Alarm Systems

The Protected Premises Alarm and Signaling System is the basis of all other systems found in the National Fire Alarm and Signaling Code, NFPA 72. The requirements for a Protected Premises will apply to fire alarm systems and signaling systems that utilize voice instructions during non-fire emergencies. The purpose of a Protected Premises Alarm and Signaling Systems is to protect life and property from the losses due to fire within the building they are installed, and NFPA 72 allows Dedicated Systems. Dedicated systems will perform emergency control functions to enhance the survivability during a fire when building codes do not require a fire alarm system. The features of a protected premises are the basic fundamentals that are found in dedicated systems, fire alarm systems and emergency voice and communication systems. Code: NFPA 72 (2025) | Duration: 4 Contact-Hours | Cost: $40.00 | Access: 30-Days

Instructional Design Group (IDG), LLC

Instructional Design Group (IDG), LLC

$40

Fire Alarm Basic Bundle

The Fire Alarm Basic Bundle (FABB) consists of five core fire alarm courses: Fire Alarm System Fundamentals; Fire Alarm System Documentation; Fire Alarm System Initiating Devices; Fire Alarm System Notification Appliances; and Protected Premises Alarm Systems.

Courses: 6

$80

Mission Statement

Instructional Design Group, LLC is dedicated to providing training and development programs designed to a higher, industry-recognized standard. Our courses will focus on building knowledge of the codes and standards that are adopted and specified across trades and industries. The knowledge learned will enable individuals to obtain certification to demonstrate qualifications and contribute to the Quality of Life (QOL).

Pricing Plan: One-time payment with options to pay.

(Companies and organizations who enroll five or more students qualify for bulk rates. Contact Us at [email protected] for discount.)

100% Organic!

Our Courses are designed to produce competent engineering technicians who are proficient in current published codes and standards. Our content is 100% organic and created by industry Subject Matter Experts (SME's). No AI-generated content.

Frequently Asked Questions


Q: How long does it take to get my certificate when I pass?

A: Certificates are issues upon successful completion of the course Knowledge Assessment. You will also be emailed with a link to download the certificate.


Q: I took the course for points to renew my NICET certification. How many points can I count?

A: Our training courses are categorized as "Distance Learning," and provide three contact hours of instruction. You can count 3 NICET CPD's as Additional Education.


Q: How long can I access the course?

A: The course will be available for 30 days after the date of purchase.