Fire Alarm Systems

[IDG-02-008]

The purpose of fire alarm systems is to enhance the chance of survivability in a building during a fire. Fire alarm systems perform this goal when the equipment is properly installed, according to a design by a qualified person. Fire alarm equipment includes the control panel, initiating devices and notification appliances. Fire alarm systems also interface with other buildings systems to control the spread of smoke, and used by responding emergency forces. The types of fire alarm systems can be dedicated to a building function, the evacuation of occupants during a fire, and to also summon aid.

Code: NFPA 72 (2025) | Duration: 8 Contact-Hours | Cost: $65.00 | Access: 30-Days

Download Syllabus

IDG University has partnered with Accredible to issue digital credentials. The technicians who complete an online course will be issued an electronic badge and certificate.

Awardees of the badge and credentials will have the ability to post on social media.

No Textbooks Needed!

Our courses are designed to engage the participant to interact with published codes and standards. We don't try to sell you books. The "Text Books" required for all of our courses are codes and standards that can be accessed online for FREE!

Fire Alarm Systems

The topics covered in this course are listed below:

  • Define common terms associated with fire alarm systems.
  • Identify the requirements of personnel qualifications to design, install and maintain fire alarm systems.
  • Determine the appropriate alarm system signal for changes in conditions.
  • Describe the purpose and operation of initiating devices and notification appliances.
  • Compare the features of emergency control functions and explain how they enhance survivability.
  • Explain the features of dedicated systems and the types of fire alarm systems.

Course Curriculum


  Instructions
Available in days
days after you enroll
  Introduction
Available in days
days after you enroll
  Course References
Available in days
days after you enroll
  Learning Objectives
Available in days
days after you enroll
  Definitions
Available in days
days after you enroll
  Module 1: Fundamentals
Available in days
days after you enroll
  Module 2: Circuit Performance
Available in days
days after you enroll
  Module 3: Initiating Devices
Available in days
days after you enroll
  Module 4: Notification Appliances
Available in days
days after you enroll
  Module 5: Emergency Control Functions
Available in days
days after you enroll
  Module 6: Types of Alarm Systems
Available in days
days after you enroll
  Knowledge Assessment
Available in days
days after you enroll

Instructional Design Group, LLC's IDG University

Fire Alarm and Fire Protection Customized Training and Program Development for Companies, Organizations and Individuals

Featured Courses

Fire Alarm ITM (Insp/Test/Maint)

The inspection, testing and maintenance (ITM) of fire alarm and signaling systems will start when the system is commissioned, and end when it is removed from service. The National Fire Alarm and Signaling Code (NFPA 72) requires periodic inspections and testing to ensure systems will operate as designed. Fire alarm and signaling systems are required to be maintained, and deficiencies found during inspections and testing must be corrected. Testing. inspection and maintenance is performed according to NFPA 72 by qualified personnel, and the responsibility of the Owner. Code: NFPA 72 (2025) | Duration: 4 Contact-Hours | Cost: $40.00 | Access: 30-Days

Instructional Design Group (IDG), LLC

Instructional Design Group (IDG), LLC

$45

Foam Suppression Systems

Foam suppression systems are utilized in applications involving hazardous materials, dangerous chemicals or flammable liquids, to prevent or suppress a fire. Foam suppression systems are either mobile, or fixed and are also found in marine applications. The characteristics of foam enable the agent to disrupt the chemical reaction of fire by removing heat and oxygen. The standards used today for foam suppression systems was developed by the National Fire Protection Association in 1921 to address fire hazards in manufacturing. The evolution of the use of foam to suppress fires considers the impact on the environment and the health of humans. Code: NFPA 11 (2024) | Duration: 4 Contact-Hours | Cost: $40.00 | Access: 30-Days

Instructional Design Group (IDG), LLC

Instructional Design Group (IDG), LLC

$45

Bi-Directional Amplifier (BDA) Systems | ICC Approved

Bi-Directional Amplifier (BDA) Systems is a term that frequently refers to Emergency Responder Communication Enhancement Systems (ERCES). The purpose of these systems is to ensure hand-held radio coverage in buildings for first responders. Firefighters are first responders, but the term also includes police and emergency medical personnel. ERCES were developed due to the lack of in-building communication during operations at the World Trade Center terrorist attack on September 11, 2001. The design and installation of BDA systems are required to be performed by qualified individuals. The operation of BDA systems, or lack of, can result in the loss of life. Code: IFC (2024) | NFPA 70 (2023) | NFPA 1225 (2022) | Duration: 5 Contact-Hours | Cost: $00.00 | Access: 30-Days

Instructional Design Group (IDG), LLC

Instructional Design Group (IDG), LLC

$55

Mission Statement

Instructional Design Group, LLC is dedicated to providing training and development programs designed to a higher, industry-recognized standard. Our courses will focus on building knowledge of the codes and standards that are adopted and specified across trades and industries. The knowledge learned will enable individuals to obtain certification to demonstrate qualifications and contribute to the Quality of Life (QOL).

Pricing Plan: One-time payment with options to pay.

(Companies and organizations who enroll five or more students qualify for bulk rates. Contact Us at [email protected] for discount.)

100% Organic!


Our Courses are designed to produce competent engineering technicians who are proficient in current published codes and standards. Our content is 100% organic and created by industry Subject Matter Experts (SME's). No AI-generated content.

Frequently Asked Questions

Q: How long does it take to get my certificate when I pass?

A: Certificates are issues upon successful completion of the course Knowledge Assessment. You will also be emailed with a link to download the certificate.

Q: I took the course for points to renew my NICET certification. How many points can I count?

A: Our training courses are categorized as "Distance Learning," and provide three contact hours of instruction. You can count 8 NICET CPD's as Additional Education or 8 NFPA Points.


Q: How long can I access the course?

A: The course will be available for 30 days after the date of purchase.